Set Minimod2+ for USA ANTENNA TV Channels 
( ATSC )

All these settings can be done also via Computer Web Interface.
In this guide we show the quick direct setting via the color display without the need of a computer.

IMPORTANT: 

If you want to combine MULTIPLE MINIMOD2+ 

over the same coaxial cable 

Please Make Sure 

Each Minimod2+ unit
IS SET WITH DIFFERENT PARAMETERS
so the combined Minimod2+ units
will not Jam Each Other!

(1)
This is the Main Menu

(2) From Main Menu
GO TO General Setup >
TV Standard >
set USA AIR ATSC

IMPORTANT
TO CHANGE THE STANDARD
YOU MUST GO TO GENERAL SETUP
SUB MENU

YOU CANNOT CHANGE THIS FROM THE CHANNEL SETUP MENU

(3)From Main Menu
Channel Setup >
Channel By Plan >
select the wanted channel for this unit

IMPORTANT:
USE DIFFERENT CHANNELS ON DIFFERENT MULTIPLE UNITS TO AVOID CONFLICTS!

IMPORTANT:
IF YOU MIX WITH OTHER Antenna or Cable TV CHANNELS MAKE SURE THE CHANNEL YOU SET IS NOT ALREADY TAKEN ON YOUR TV CHANNELS LIST TO AVOID CONFLICTS!

We suggest to start from channel frequency 10 Up as lower channels frequencies might be reserved by other services or not received on some tuners

(4) From Main Menu
Channel Setup >
Channel Main Number >
set the destination # on your TV list
(your TVs will store this channel on their list in this remote control position number)

(5) From Main Menu
Channel Setup>
Channel Sub Number >
set the destination sub # on your TV
(usually this is left to #1)
(allows to list this channel as part of a sub list such as TV remote button 1 DOT sub button 1/2/3/4....   two clicks...)

(6)From Main Menu
Channel Setup >
Program Name >
set the NAME will show on your TV

IMPORTANT:

Please Make Sure to Scan Your TVs for DIGITAL AIR ANTENNA TV Channels!
If you scan your TVs for ANALOG ONLY Channels it will not find this AIR Digital Channel
If you scan your TVs for CABLE TV Channels it will not find this AIR Digital Channel
Check your TVs manual for How To Scan Digital AIR ANTENNA ATSC Channels